Haida Instrument 400-071-1808/0769-89280808
Peel strength tester is also a tension machine, first to understand where the use of the encoder is, the general electronic tension machine encoder is the role of the elongation of the test sample for the test, its own name is there are many, under normal circumstances used in the electronic Rally machine is not a rotary type is a square model, rotating circular optical encoder, because each position is absolutely unique, anti-jamming, no power-down memory, has been increasingly widely used in various industrial systems, Length test and positioning control. If you want to measure more than 360 degrees of rotation, you will need a multi-turn absolute encoder. Encoder manufacturers use the principle of watch gear machinery. When the center code wheel rotates, another set of code wheels (or multiple sets of gears, multiple sets of code plates) is transmitted through the gear, and the number of turns is increased on the basis of the single-turn code. Encode to increase the measuring range of the encoder. Such an absolute encoder is called a multi-turn absolute encoder. It is also determined by a mechanical position determination code. Each position code is unique and does not need to be memorized.
The rotary encoder on the electronic tensile machine has high testing accuracy, good complex performance, long life and durability, 360 degrees without any interference signal uniqueness of each position, it does not need to remember, does not need to find a reference point, and does not have to Count, when you need to know the location, when to read its location. In this way, the anti-jamming characteristics of the encoder and the reliability of the data are greatly improved. Another advantage of the multi-turn encoder is that due to the large measurement range, the actual use is often more affluent, so that it is not necessary to laboriously find the zero point during installation, and an intermediate position can be used as a starting point, which greatly simplifies the difficulty of installation and debugging. The multi-turn absolute encoder has obvious advantages in length positioning and has been increasingly used in industrial control positioning.